Home » Guides » Biker Garage - Renewing Brake Fluid

Biker Garage - Renewing Brake Fluid

Created by Boerke   ::   Dec 2, 2019    


One of the jobs that you will have to do on a regular basis after level 10 is brake system servicing. That is, emptying the brake system and filling the brake system with brake fluid.

This short guide helps you accomplish this task in Biker Garage Mechanic Simulator.

Requirements



  • You need to have completed 10 jobs, which opens the second lift room where you can find all the fluids.
  • You need to place the Air Compressor and Brake Fluid Kit at the lift that you're working at.

Emptying the System



The easy part, it just requires a little patience and a steady click on the mouse...

  1. Right click the lift and select the Service action mode;
  2. Click and hold one of the lower brake system end points like one of the calipers (not the reservoir);
  3. Use right mouse button (RMB) to completely drain the system of fluids;

Filling the System



This is a more cumbersome task as it envolves repeating the same steps a few times.

  1. Right click the lift and select the Service action mode;
  2. Click and hold the Left Mouse Button (LMB) on the brake reservoir (the right handle);
  3. Hold LMB to fill the reservoir;
  4. Press <ESC> to return to the service overview;
  5. Click and hold LMB on one of the lower parts of the system (caliper(s) or brake pedal);
  6. Use RMB to completely drain the system of fluids;

Repeat these steps for each of the lower parts of the system, and finally fill up the reservoir once more.

Game:   Biker Garage
Created by Boerke.